Axel AX3000 Platine Terminal Ethernet TCP/IP 65E Instrukcja Użytkownika

AXEL Platine Terminal Ethernet TCP/IP Models TCP/IP AX3000 USER'S MANUAL November 2003 - Ref.: AXTCPE/0303-3

A.12.1 - Hardware Information...223 A.12.2 - Firmware Information ...

Installing under OS/400 90 TCP/IP AX3000 User's Manual This chapter covers AX3000 installation under OS/400. This chapter is dedicated to the

Installing under OS/400 TCP/IP AX3000 User's Manual 91 To set the keyboard type, enter the AX3000 Set-Up and select the [Configuration]→[Term

Installing under OS/400 92 TCP/IP AX3000 User's Manual These parameters are: - Connection Type: select telnet - Host: press <Space> t

Installing under OS/400 TCP/IP AX3000 User's Manual 93 a) 5250 Emulation General Parameters Within the 'Session Profile' box, selec

Installing under OS/400 94 TCP/IP AX3000 User's Manual - custom: any character can be replaced by the Euro symbol within the current characte

Installing under OS/400 TCP/IP AX3000 User's Manual 95 Within the 'Session Profile' box. Select "User Defined Key" and pr

Installing under OS/400 96 TCP/IP AX3000 User's Manual related profile parameters (username, password, etc.). The Auto-Signon box is accessed

Installing under OS/400 TCP/IP AX3000 User's Manual 97 - AUX2 port: select [Configuration]→[Terminal]→[General]. Within this box, if &apos

Installing under OS/400 98 TCP/IP AX3000 User's Manual The status symbols are described in the following table. Symbol Name Meaning ] System

Installing under OS/400 TCP/IP AX3000 User's Manual 99 5250 Functions: 5250 Functions 5250 Keyboard PC/AT Keyboard Attention <Attn>

Introduction TCP/IP AX3000 User's Manual 1 INTRODUCTION

Installing under OS/400 100 TCP/IP AX3000 User's Manual Axel Functions: Axel Function 5250 Keyboard PC/AT Keyboard AX3000 Shutdown <R

Installing under OS/400 TCP/IP AX3000 User's Manual 101 Example: 1 - Press <Alt Gr><F4> to set the Record mode. The 5250 status

Installing under OS/400 102 TCP/IP AX3000 User's Manual 6.2.4 - The Mouse Four mouse actions are possible: - left-click, two possible actions

Installing under OS/400 TCP/IP AX3000 User's Manual 103 These printers can be controlled by one of two protocols: - Prt5250: this service (RF

Installing under OS/400 104 TCP/IP AX3000 User's Manual In the displayed box, set the "Associated Service" to "Prt5250",

Installing under OS/400 TCP/IP AX3000 User's Manual 105 - Paper Source 1 (PPRSRC1): selected through list. Default value: *MFRTYPMDL - Paper

Installing under OS/400 106 TCP/IP AX3000 User's Manual If not there is a basic hardware problem that needs to be fixed. Check cable, check c

Installing under OS/400 TCP/IP AX3000 User's Manual 107 The main error codes are: - 8903 (Device not valid for session): the printer name is

Installing under OS/400 108 TCP/IP AX3000 User's Manual 6.4.2 - Resetting an AX3000 resource (screen session or aux. port) The reset feature

Installing under OS/400 TCP/IP AX3000 User's Manual 109 b) Under OS/400 The whole AX3000 set-up can be obtained by invoking the following com

Introduction 2 TCP/IP AX3000 User's Manual This manual provides the information required to operate and maintain the AX3000. The manual is

Installing under OS/400 110 TCP/IP AX3000 User's Manual Parameters of the RUNRMTCMD command: - AX_DOWNLOAD : command for firmware downloadin

Installing under OS/400 TCP/IP AX3000 User's Manual 111 two connections with the same DEVNAME. This problem can be solved by tuning 'kee

Installing under OS/390 TCP/IP AX3000 User's Manual 113 CHAPTER 7 --- INSTALLING UNDER OS/390

Installing under OS/390 114 TCP/IP AX3000 User's Manual This chapter covers AX3000 installation under OS/390 zSeries. This chapter is dedicat

Installing under OS/390 TCP/IP AX3000 User's Manual 115 7.1.1 - Setting a Session To set a profile session, enter the AX3000 Set-Up and selec

Installing under OS/390 116 TCP/IP AX3000 User's Manual 7.1.2 - Customising the 3270 Emulation Various 3270 emulation parameters can be modif

Installing under OS/390 TCP/IP AX3000 User's Manual 117 7.2 - USING THE TERMIMAL 7.2.1 - The 3270 Status Line Note: the 3270 status line is d

Installing under OS/390 118 TCP/IP AX3000 User's Manual Keyboard Symbols Symbol Meaning X () Keyboard is disabled X Only <Enter> is di

Installing under OS/390 TCP/IP AX3000 User's Manual 119 The following table lists the other useful keys: 3270 Functions PC/AT keyboard Fast

Introduction TCP/IP AX3000 User's Manual 3 Chapter 7: Installing under OS/390 AX3000 installation under 0S/390 and description of the 3270 ded

Installing under OS/390 120 TCP/IP AX3000 User's Manual switching off. Recorded keystrokes can be assigned to any of the twelve function key

Installing under OS/390 TCP/IP AX3000 User's Manual 121 b) Processing a key sequence To execute a series of keystrokes that have been recorde

Installing under Windows TCP/IP AX3000 User's Manual 123 CHAPTER 8 --- INSTALLING UNDER WINDOWS

Installing under Windows 124 TCP/IP AX3000 User's Manual This chapter covers AX3000 installation under Windows This chapter describes the ope

Installing under Windows TCP/IP AX3000 User's Manual 125 8.1 - RDP SCREEN SESSION The AX3000 allows up to four concurrent and independent ses

Installing under Windows 126 TCP/IP AX3000 User's Manual On AX3000 models 75/75E, the resolutions available and VGA frequencies are selected

Installing under Windows TCP/IP AX3000 User's Manual 127 These parameters are: - Encryption: three values of encryption are available. (for

Installing under Windows 128 TCP/IP AX3000 User's Manual - Automatic Logon: set this parameter to 'Yes' to get an automatic logon.

Installing under Windows TCP/IP AX3000 User's Manual 129 Note: the printer dataflow can be compressed. See next sub-chapter. d) Bandwidth Wit

Installing under Windows 130 TCP/IP AX3000 User's Manual - Mouse Events Reported: the options are: - all (default): all mouse events (clicks

Installing under Windows TCP/IP AX3000 User's Manual 131 When this utility is run the dialog box below is displayed: To configure the RDP se

Installing under Windows 132 TCP/IP AX3000 User's Manual The terminal encryption level must match that of the server. Note: despite its name

Installing under Windows TCP/IP AX3000 User's Manual 133 b) Automatic Logon Information required for logon (username, domain name and passwor

Installing under Windows 134 TCP/IP AX3000 User's Manual Disable the 'Always prompt for password' check box. c) Idle Session Limit

Installing under Windows TCP/IP AX3000 User's Manual 135 The idle session disconnection can be set either at the user settings level (see the

Installing under Windows 136 TCP/IP AX3000 User's Manual d) Desktop Background with Windows 2003 By default, with a Windows 2003 server, it i

Installing under Windows TCP/IP AX3000 User's Manual 137 To allow blank passwords run the "Local Security Policy" utility (in [Star

Installing under Windows 138 TCP/IP AX3000 User's Manual On the left panel, select the session to be killed, then right-click. Within the di

Installing under Windows TCP/IP AX3000 User's Manual 139 When the RDP session is established, the value of certain parameters can be re-negot

A Look at the AX3000 TCP/IP AX3000 User's Manual 5 CHAPTER 1 --- A LOOK AT THE AX3000

Installing under Windows 140 TCP/IP AX3000 User's Manual c) Disconnect from the AX3000 Keyboard The <Ctrl><Alt><Shift><

Installing under Windows TCP/IP AX3000 User's Manual 141 available. (See Chapter 8.1.1, Sub-Chapter c). The same printer can be handled with

Installing under Windows 142 TCP/IP AX3000 User's Manual - Printer Port Name: this is the port identifier. Normally the same name is used for

Installing under Windows TCP/IP AX3000 User's Manual 143 applications they are not meant to access. They may also be able to change setup and

Installing under Windows 144 TCP/IP AX3000 User's Manual 8.5 - REMOTE ADMINISTRATION An administration utility (AxRM or Axel Remote Managemen

Tools and Statistics TCP/IP AX3000 User's Manual 145 CHAPTER 9 --- TOOLS AND STATISTICS

Tools and Statistics 146 TCP/IP AX3000 User's Manual This chapter describes the embedded AX3000 tools. The AX3000 provides the following feat

Tools and Statistics TCP/IP AX3000 User's Manual 147 Select the [Diagnostics]→[Connection state] dialog to check the status of all defined co

Tools and Statistics 148 TCP/IP AX3000 User's Manual For each auxiliary port, the following information is displayed: - Port: the name of the

Tools and Statistics TCP/IP AX3000 User's Manual 149 9.3.1 - Ethernet Statistics The following information is displayed: "Output"

A Look at the AX3000 6 TCP/IP AX3000 User's Manual This chapter introduces the main features of the AXEL TCP/IP terminal. 1.1 - TERMINAL FUNC

Tools and Statistics 150 TCP/IP AX3000 User's Manual 9.3.2 - TCP Server and TCP Client Statistics The TCP server statistics contain informati

Tools and Statistics TCP/IP AX3000 User's Manual 151 The TCP client statistics contain information about connections where the AX3000 is acti

Tools and Statistics 152 TCP/IP AX3000 User's Manual 9.3.3 - DHCP Client Statistics The DHCP client statistics contain information about DHCP

Remote Set-Up TCP/IP AX3000 User's Manual 153 CHAPTER 10 --- REMOTE SET-UP

Remote Set-Up 154 TCP/IP AX3000 User's Manual This chapter covers remote set-up of the TCP/IP AX3000. 10.1 - OVERVIEW This feature enables an

Remote Set-Up TCP/IP AX3000 User's Manual 155 10.2 - AX3000 REMOTE SET-UP To set-up an AX3000 remotely, use the 'setup_send' command

Remote Set-Up 156 TCP/IP AX3000 User's Manual 'setup_get' command (or 'setup_get_lite' command). This command sends a lis

Remote Set-Up TCP/IP AX3000 User's Manual 157 ERR 102: bad header label protocol version. Command: setup_send Cause: the protocol version (i

Remote Set-Up 158 TCP/IP AX3000 User's Manual ERR 106: cmos busy. Command: setup_send Cause: another command (setup_get or setup_send) is r

Remote Set-Up TCP/IP AX3000 User's Manual 159 ERR 202: xxx: invalid value. Command: setup_send Cause: the value assigned to this set-up par

A Look at the AX3000 TCP/IP AX3000 User's Manual 7 - by escape sequences: compatible with serial terminals. 1.3 - TOOLS AND STATISTICS Embedd

Remote Set-Up 160 TCP/IP AX3000 User's Manual Solution: check the host configuration. ERR 213: too many sessions or pages. Page number set

Downloading Firmware TCP/IP AX3000 User's Manual 161 CHAPTER 11 --- DOWNLOADING FIRMWARE

Downloading Firmware 162 TCP/IP AX3000 User's Manual This chapter explains how to upgrade TCP/IP AX3000 firmware over a network. Firmware ca

Downloading Firmware TCP/IP AX3000 User's Manual 163 11.1.2 - Under Unix These 2 protocols are included, but the default configuration does no

Downloading Firmware 164 TCP/IP AX3000 User's Manual A file ‘tftp’ should be present in /etc/xinetd.d. This file contains the tftp server se

Downloading Firmware TCP/IP AX3000 User's Manual 165 6 - Change the default TFTP directory: ===> CHGTFTPA ALTSRCDIR('/axfirm') 7

Downloading Firmware 166 TCP/IP AX3000 User's Manual Example for Unix/Linux: # rsh ax3001 ax_download password /usr/firm 192.168.1.249 Note

Downloading Firmware TCP/IP AX3000 User's Manual 167 11.2.2 - Downloading Through Set-Up Enter AX3000 Set-Up (<Ctrl><Alt><Esc&g

Downloading Firmware 168 TCP/IP AX3000 User's Manual The bootp protocol is used get the location (IP address of the tftp host and filename)

Downloading Firmware TCP/IP AX3000 User's Manual 169 IMPORTANT: if a problem occurred during a previous download operation (whatever method wa

A Look at the AX3000 8 TCP/IP AX3000 User's Manual 1.4 - EXAMPLE CONFIGURATION TCP/IP AX3000 LPD PrinterHost 4Host 4Host 1Host 1Host 3Host 3W

Downloading Firmware 170 TCP/IP AX3000 User's Manual 11.4 - THE DOWNLOAD PROCESS During the download operation, the following messages are d

Downloading Firmware TCP/IP AX3000 User's Manual 171 Then, the selected firmware file is downloaded (each dot represents 512 bytes): Loading c

Downloading Firmware 172 TCP/IP AX3000 User's Manual 11.5.2 - The tftp Stage A tftp error message can originate from either the tftp host or

Downloading Firmware TCP/IP AX3000 User's Manual 173 14: the firmware file size is less than 256 bytes. This indicates that the file is not a

Appendix TCP/IP AX3000 User's Manual 175 APPENDIX

Appendix 176 TCP/IP AX3000 User's Manual The following appendices give information about: A.1 - Using the AX3000 interactive set-up A.2 - Ne

Appendix TCP/IP AX3000 User's Manual 177 The AX3000 set-up comprises a horizontal general menu, which calls vertical menus or dialog boxes. A

Appendix 178 TCP/IP AX3000 User's Manual Note: the symbol '>', beside a vertical menu item, indicates that it is a sub-menu. Exp

Appendix TCP/IP AX3000 User's Manual 179 During this mode the following keys are enabled: - <CR>: confirmation - <Esc>: abandon yo

First Boot-Up and Quick Set-Up TCP/IP AX3000 User's Manual 9 CHAPTER 2 --- FIRST BOOT-UP AND QUICK SET-UP

Appendix 180 TCP/IP AX3000 User's Manual A.2 - NETWORK OVERVIEW A.2.1 - Ethernet Addresses AX3000 terminals (like other devices equipped for

Appendix TCP/IP AX3000 User's Manual 181 For example: an AX3000 connected, over a network, to a host with an IP address 192.1.168.40 (class C:

Appendix 182 TCP/IP AX3000 User's Manual Example 1: router 1 is used to reach the 192.168.2.xxx network and router 2 is used to reach the 192

Appendix TCP/IP AX3000 User's Manual 183 Example 2: router 1 is used to reach both networks (192.168.2.xxx and 192.1.1.xxx): AX3000Router 1192

Appendix 184 TCP/IP AX3000 User's Manual A.3 - LPD PRINTERS This appendix gives the information needed to add an LPD printer within your oper

Appendix TCP/IP AX3000 User's Manual 185 Printers can be added using either of two methods: - Standard Processing: AIX sends a raw file to t

Appendix 186 TCP/IP AX3000 User's Manual To add a system printer invoke the following command (AXPRT01 is the OS/400 printer name): ===>

Appendix TCP/IP AX3000 User's Manual 187 A.4.1 - Overview Here is a brief description of Axel’s implementation DHCP: - At boot time the AX3000

Appendix 188 TCP/IP AX3000 User's Manual A.4.3 - Using the AX3000 If the DHCP protocol is enabled the AX3000 automatically requests an IP add

Appendix TCP/IP AX3000 User's Manual 189 - <F11>: rebooting the AX3000 to run the DHCP search again. - <Ctrl><Alt><Esc>

The reproduction of this material, in part or whole, is strictly prohibited. For additional information, please contact: 14 Avenue du Québec Bât.

First Boot-Up and Quick Set-Up 10 TCP/IP AX3000 User's Manual This chapter gives the information needed to use the 'Quick Set-Up' f

Appendix 190 TCP/IP AX3000 User's Manual A.5 - THE DNS PROTOCOL The DNS protocol (Domain Name System) allows names to be 'resolved'

Appendix TCP/IP AX3000 User's Manual 191 has been obtained by a previous resolution. A.5.2 - Resolution Strategy To resolve a name, a DNS req

Appendix 192 TCP/IP AX3000 User's Manual - linux: an IP address is associated. No DNS resolution. - www.axel.com: this is a full name. The re

Appendix TCP/IP AX3000 User's Manual 193 Two DNS Servers: 1 - A DNS request is sent to the server 1. 2 - In event of no response from server

Appendix 194 TCP/IP AX3000 User's Manual In the event of a problem, the "Resolved: a.b.c.d" message is replaced by an error message

Appendix TCP/IP AX3000 User's Manual 195 Example: BEGIN_AX_SETUP V1.1 # this is a comment tcp_host1_name=vangogh ... END_AX_SETUP Note: lines

Appendix 196 TCP/IP AX3000 User's Manual In the following parameter lists, the possible values are bracketed after each set-up parameter. A c

Appendix TCP/IP AX3000 User's Manual 197 ethernet_dhcp_leasetime (number) ethernet_dhcp_clientid (character string, 10 char max.) ethernet_dh

Appendix 198 TCP/IP AX3000 User's Manual tcp_router1_mask=255.255.255.0 (address IP format) tcp_router2_ip=192.168.1.253 (address IP format

Appendix TCP/IP AX3000 User's Manual 199 aux%_filter_nl=no (yes | no) aux%_auto_ff=no (yes | no) aux%_rtty_accept=no (yes | no) aux%_associ

First Boot-Up and Quick Set-Up TCP/IP AX3000 User's Manual 11 2.2 - STANDARD QUICK SET-UP With a standard firmware the quick set-up box is th

Appendix 200 TCP/IP AX3000 User's Manual Note: Depending on the associated service (aux%_service), some parameters can be inactive. They are

Appendix TCP/IP AX3000 User's Manual 201 Parallel Port Parameters parallel_service=none (none | rtty | printd | lpd | rcmd Prt5250) parall

Appendix 202 TCP/IP AX3000 User's Manual Note: Depending on the associated service (parallel_service), some parameters can be inactive. They

Appendix TCP/IP AX3000 User's Manual 203 multi_s1=112 (number in range 2 to 123) multi_s2=112 (number in range 2 to 123) multi_s3=112 (numb

Appendix 204 TCP/IP AX3000 User's Manual Note: when a configuration file is obtained from an AX3000: - the value of term_operating_mode is co

Appendix TCP/IP AX3000 User's Manual 205 s%_eurocode= (no | euro ASCII code) s%_screen_scroll=yes (yes | no) s%_screen_wrap=yes (yes | no)

Appendix 206 TCP/IP AX3000 User's Manual s%_rdp_encryption= (low | medium | high | no) s%_rdp_cachebitmap=yes (yes | no) s%_rdp_compression

Appendix TCP/IP AX3000 User's Manual 207 s%_udk_f7= (character string, 32 char max.) s%_udk_f8= (character string, 32 char max.) s%_udk_f9=

Appendix 208 TCP/IP AX3000 User's Manual s%_udk_f46= (character string, 32 char max.) s%_udk_f47= (character string, 32 char max.) s%_udk_f

Appendix TCP/IP AX3000 User's Manual 209 - parameters referring to non-valid sessions are commented out. - the standard colouring mode paramet

First Boot-Up and Quick Set-Up 12 TCP/IP AX3000 User's Manual 2.3 - QUICK SET-UP WITH DHCP AND DNS PROTOCOLS With a DHCP/DNS firmware the qui

Appendix 210 TCP/IP AX3000 User's Manual Run the following command to associate the AX3000’s Ethernet address xx:xx:xx:xx:xx:xx with the IP a

Appendix TCP/IP AX3000 User's Manual 211 ax_reboot Rebooting the AX3000. Example: rsh ax3000 ax_reboot [password] More information: chapter 1

Appendix 212 TCP/IP AX3000 User's Manual a) Enabling the Serial Mode Enter the AX3000 Set-Up (<Ctrl><Alt><Esc>) and select

Appendix TCP/IP AX3000 User's Manual 213 For more information (Unix settings, multi-screen parameters, etc.), please refer the AX3000 model 40

Appendix 214 TCP/IP AX3000 User's Manual Models 55/55E, 60/60E and 65/65E: Models 75/75E: A.10.1 - The 'mss' and 'window&apo

Appendix TCP/IP AX3000 User's Manual 215 These two parameters are the AX3000 resources allocated to telnet and tty screen sessions for receivi

Appendix 216 TCP/IP AX3000 User's Manual because the TCP ports are different). However this does create ‘phantom’ sessions, as the initial se

Appendix TCP/IP AX3000 User's Manual 217 A.10.6 - The 'IP Addr. Set by Ping' Parameter This parameter is common to all TCP/IP AX3000

Appendix 218 TCP/IP AX3000 User's Manual the nominal value. Communication fails if the difference between the AX3000 base frequency and the d

Appendix TCP/IP AX3000 User's Manual 219 The AX3000 will not transmit data for printing if the printer handles only the "Busy" signa

First Boot-Up and Quick Set-Up TCP/IP AX3000 User's Manual 13 - Host Name: if the IP address of a host is not given, this name will be resolv

Appendix 220 TCP/IP AX3000 User's Manual TCP/IP: - Enable DHCP: from the quick set-up - AX3000 IP Address: from the quick set-up - AX3000 Net

Appendix TCP/IP AX3000 User's Manual 221 Terminal: - Number of session: from the quick set-up - Number of page/session: 1 - Flip between sess

Appendix 222 TCP/IP AX3000 User's Manual AUX2 Auxiliary Port: - Operating mode: from the quick set-up (mouse if VNC, otherwise printer) - S

Appendix TCP/IP AX3000 User's Manual 223 - Prt5250 service settings: - host: from the quick set-up - TCP port: 23 - TERM: IBM-3812-1 - auto

Appendix 224 TCP/IP AX3000 User's Manual - BVyyy is the boot code version (the boot code is the non-erasable part of the flash memory) There

Appendix TCP/IP AX3000 User's Manual 225 - EE: Estonia - FI: Finland - FR: France - GR: Greece - IS: Iceland - PL: Poland - PT: Port

Appendix 226 TCP/IP AX3000 User's Manual STD stands for ANSI, VT2, WYS and SER I52 3252 emulation I32 3270 emulation ANS ANSI-based emu

Appendix TCP/IP AX3000 User's Manual 227 43L 43-line mode support DNL downloadable font support PFK <F1> to <F4> remapped to th

PERSONAL NOTES

14 Avenue du Québec Bât. K2 EVOLIC - BP 728 91962 Courtabœuf cedex - FRANCE Tel.: 33 1.69.28.27.27 - Fax: 33 1.69

Interactive Set-Up TCP/IP AX3000 User's Manual 15 CHAPTER 3 --- INTERACTIVE SET-UP

Interactive Set-Up 16 TCP/IP AX3000 User's Manual This chapter describes AX3000 installation using the interactive set-up procedure. Use the

Interactive Set-Up TCP/IP AX3000 User's Manual 17 3.1.1 - AX3000 Interface Select [Configuration]→[TCP/IP]→[Interface] and enter the followin

Interactive Set-Up 18 TCP/IP AX3000 User's Manual Add a Host: move the highlight cursor to a vacant line and enter the name and IP address of

Interactive Set-Up TCP/IP AX3000 User's Manual 19 Select the [Configuration]→[TCP/IP]→[Routers] dialog to configure the router table: Default

INTRODUCTION ...1 1 - A LOOK AT THE AX3000...

Interactive Set-Up 20 TCP/IP AX3000 User's Manual - DNS protocol, - host table, - router table. Setting-up an AX3000 with DHCP and/or DNS pro

Interactive Set-Up TCP/IP AX3000 User's Manual 21 a) "Enable DHCP" is set to "No" Only the 'AX3000 IP Address'

Interactive Set-Up 22 TCP/IP AX3000 User's Manual The parameters of the DHCP Enhanced Box are: - Lease Time (minutes): lease time value reque

Interactive Set-Up TCP/IP AX3000 User's Manual 23 The parameters of the DNS box are: - DNS Servers: to resolve a name, the AX3000 sends DNS re

Interactive Set-Up 24 TCP/IP AX3000 User's Manual The host server definition depends on whether or not DNS is enabled (see Chapter 3.2.2): -

Interactive Set-Up TCP/IP AX3000 User's Manual 25 To configure the router table, select the [Configuration]→[TCP/IP]→[Routers] menu. A dialog

Interactive Set-Up 26 TCP/IP AX3000 User's Manual 3.3 - SETTING SCREEN, KEYBOARD, PRINTER AND MOUSE Select the [Configuration]→[Terminal]→[Ge

Interactive Set-Up TCP/IP AX3000 User's Manual 27 - Enhanced Screen Mode: this parameter allows a special VGA mode (colour or underline attrib

Interactive Set-Up 28 TCP/IP AX3000 User's Manual - Nationality: select the nationality from the following list: American English French

Interactive Set-Up TCP/IP AX3000 User's Manual 29 - Post-hardcopy String (available if "default port" isn't "none"):

a) Using rtty ...41 b) Using the rsh Command to Print...

Interactive Set-Up 30 TCP/IP AX3000 User's Manual Select the [Configuration]→[Terminal]→[Session X] dialog (where X is the session number) to

Interactive Set-Up TCP/IP AX3000 User's Manual 31 A connection is characterised by the following parameters: - Connection Type: telnet, tty or

Interactive Set-Up 32 TCP/IP AX3000 User's Manual 3.4.2 - Virtual Terminal Settings The main parameter of a virtual terminal is the Pre-defin

Interactive Set-Up TCP/IP AX3000 User's Manual 33 Selection of a pre-defined configuration resets all virtual terminal parameters to the pre-d

Interactive Set-Up 34 TCP/IP AX3000 User's Manual - TERM Value (only available with telnet): the value of this environment variable is '

Interactive Set-Up TCP/IP AX3000 User's Manual 35 - Overscan (available only for a colour monitor): an overscan colour is selected by setting

Interactive Set-Up 36 TCP/IP AX3000 User's Manual 3.5.1 - Setting the AUX1 and AUX2 Serial Ports Select the [Configuration]→[Aux. Ports]→[AUX

Interactive Set-Up TCP/IP AX3000 User's Manual 37 The following parameters can be set: - Associated Service: selecting the protocol which cont

Interactive Set-Up 38 TCP/IP AX3000 User's Manual 3.5.2 - Setting the Parallel Port Select the [Configuration]→[Aux. Ports]→[Parallel] dialo

Interactive Set-Up TCP/IP AX3000 User's Manual 39 An lpd printer can be configured with 3 parameters: - an IP address (the AX3000’s IP address

b) Setting-Up the AX3000 ...70 c) Using the Multi-Shell ...

Interactive Set-Up 40 TCP/IP AX3000 User's Manual To configure the telnet service for the chosen serial auxiliary port, select the [Configura

Interactive Set-Up TCP/IP AX3000 User's Manual 41 To set the tty service on the xxx auxiliary port, enter the following parameters in the [Con

Interactive Set-Up 42 TCP/IP AX3000 User's Manual To set the rtty service on the xxx auxiliary port, enter the following parameters in the [C

Interactive Set-Up TCP/IP AX3000 User's Manual 43 3.6 - MULTI-SESSION AND STATUS LINE The multi-session dialog box controls the following AX30

Interactive Set-Up 44 TCP/IP AX3000 User's Manual 3.6.2 - Multi-Session Keystroke A multi-session keystroke is composed of: - one or more mod

Interactive Set-Up TCP/IP AX3000 User's Manual 45 Enter the following parameters: - Enter the current password: Only if the set-up is already

Using the AX3000 TCP/IP AX3000 User's Manual 47 CHAPTER 4 --- USING THE AX3000

Using the AX3000 48 TCP/IP AX3000 User's Manual This chapter covers use of the AX3000. 4.1 - TURNING ON THE AX3000 When the AX3000 is turned-

Using the AX3000 TCP/IP AX3000 User's Manual 49 4.2 - USING MULTI-SESSION AXEL TCP/IP terminals provide multiple and concurrent connections.

a) Programming a Function Key ...100 b) Processing a key sequence...

Using the AX3000 50 TCP/IP AX3000 User's Manual 4.2.2 - Disconnecting Sessions A session can be disconnected by one of two ways: - a system c

Using the AX3000 TCP/IP AX3000 User's Manual 51 - automatically: when the terminal is idle (keyboard or screen) during a certain time, the AX

Using the AX3000 52 TCP/IP AX3000 User's Manual It is even preferable not to turn off the TCP/IP AX3000 when a login prompt is displayed (som

Using the AX3000 TCP/IP AX3000 User's Manual 53 4.5 - AX3000 HOT-KEYS The AX3000 hot-keys are listed in the following table. (These hot-keys

Installing under UNIX/LINUX TCP/IP AX3000 User's Manual 55 CHAPTER 5 --- INSTALLING UNDER UNIX/LINUX

Installing under UNIX/LINUX 56 TCP/IP AX3000 User's Manual This chapter covers AX3000 installation under Unix/Linux. 5.1 - TEXT MODE SESSION

Installing under UNIX/LINUX TCP/IP AX3000 User's Manual 57 These parameters are: - Connection Type: select 'telnet' or 'tty&a

Installing under UNIX/LINUX 58 TCP/IP AX3000 User's Manual b) The tty Protocol The tty server is a Axel proprietary protocol. An additional s

Installing under UNIX/LINUX TCP/IP AX3000 User's Manual 59 Select the [Configuration]→[Terminal]→[Session X] dialog box to set the pre-defin

8.1.2 - Configuring the Windows Server...130 a) Encryption Level ...

Installing under UNIX/LINUX 60 TCP/IP AX3000 User's Manual a) Emulation General Parameters Within the 'Session Profile' box, select

Installing under UNIX/LINUX TCP/IP AX3000 User's Manual 61 - CAPS Key Mode : set the CAPS LOCK to behave in either of three ways: - Caps Lock

Installing under UNIX/LINUX 62 TCP/IP AX3000 User's Manual b) Programmable Keys Note: the programmable key function is only available in keyb

Installing under UNIX/LINUX TCP/IP AX3000 User's Manual 63 To enter a programmable key value select the key label then press <Space>. T

Installing under UNIX/LINUX 64 TCP/IP AX3000 User's Manual The colouring mode is set within the session profile ([Configuration]→[Terminal]→[

Installing under UNIX/LINUX TCP/IP AX3000 User's Manual 65 a) Standard Colouring Mode The dialog box for the standard colouring mode is: The

Installing under UNIX/LINUX 66 TCP/IP AX3000 User's Manual b) Enhanced Colouring Mode This mode (available only with ENH firmware option) ena

Installing under UNIX/LINUX TCP/IP AX3000 User's Manual 67 To set a colouring attribute, select it and press <CR>. The following dialog

Installing under UNIX/LINUX 68 TCP/IP AX3000 User's Manual b) Using the Colouring Mode The AX3000 colouring mode is used to provide different

Installing under UNIX/LINUX TCP/IP AX3000 User's Manual 69 3.4.1), the "Login Script" parameter is used to enter the script command

11.1.6 - About Firmware Files...165 11.2 - DOWNLOADING BY TFTP PROTOCOL ...

Installing under UNIX/LINUX 70 TCP/IP AX3000 User's Manual 5.1.8 - The Multi-Shell The AXEL multi-shell software allows multiple telnet sessi

Installing under UNIX/LINUX TCP/IP AX3000 User's Manual 71 The main tcpmsh options are: - b: selecting generic names of pseudo-terminals: - b

Installing under UNIX/LINUX 72 TCP/IP AX3000 User's Manual If a view does not already exist, the tcpmsh program allocates a pseudo-terminal,

Installing under UNIX/LINUX TCP/IP AX3000 User's Manual 73 (where X is the session number). The following dialog box is displayed: Set the

Installing under UNIX/LINUX 74 TCP/IP AX3000 User's Manual These parameters are: - Resolution: Press <Space> to change the resolution.

Installing under UNIX/LINUX TCP/IP AX3000 User's Manual 75 5.2.2 - Configuring VNC on the Unix/Linux Server Warning: it is assumed that the X

Installing under UNIX/LINUX 76 TCP/IP AX3000 User's Manual Note: if the default font paths given by the O.S are not needed, use the '-no

Installing under UNIX/LINUX TCP/IP AX3000 User's Manual 77 Note: a more precise list of differences is given in Chapter 6.6. This chapter dea

Installing under UNIX/LINUX 78 TCP/IP AX3000 User's Manual A VNC terminal with Login is defined by: - its display number: this is the VNC ses

Installing under UNIX/LINUX TCP/IP AX3000 User's Manual 79 A VNC terminal without Login is defined by: - its display number: this is the VNC

A.5 - THE DNS PROTOCOL...190 A.5.1 - Overview ...

Installing under UNIX/LINUX 80 TCP/IP AX3000 User's Manual 5.3.1 - The tty Protocol The tty server is a Axel proprietary protocol. An additio

Installing under UNIX/LINUX TCP/IP AX3000 User's Manual 81 In this example, axname is the name of the AX3000 (refer to /etc/hosts file) and p

Installing under UNIX/LINUX 82 TCP/IP AX3000 User's Manual The AXEL tty server creates a ‘pipe’ between pseudo devices on the UNIX host (/dev

Installing under UNIX/LINUX TCP/IP AX3000 User's Manual 83 Note: the source file and the makefile are also provided. If the binary file requi

Installing under UNIX/LINUX 84 TCP/IP AX3000 User's Manual Notes: - Lines beginning with '#' are ignored. - Association lines 1, 2

Installing under UNIX/LINUX TCP/IP AX3000 User's Manual 85 5.4.4 -The axttyd Mechanism The axttyd daemon performs the following steps: - init

Installing under UNIX/LINUX 86 TCP/IP AX3000 User's Manual - password : specify the set-up password if set. 5.5.2 - Resetting an AX3000 reso

Installing under UNIX/LINUX TCP/IP AX3000 User's Manual 87 5.5.4 - Setting-Up the AX3000 The contents of a file is used to set-up the AX3000:

Installing under OS/400 TCP/IP AX3000 User's Manual 89 CHAPTER 6 --- INSTALLING UNDER OS/400